Roller Crusher, also referred to as sand making machine, would be the most reliable and efficient gear to crush the stones and is usually made use of in mining and petroleum business. Despite its high efficiency in heavy market, the efficiency of roller crusher could be affected by five factors.
Firstly, the hardness from the material can influence the function of roller crusher directly. It can be rather challenging to create sand with stuff which has a high stiffness. Besides, this kind of stuff will lead to harm to the machine. As a result, the efficiency and also the capability of sand producing might be weakened. So we must pay close attention for the material that we pick out.
Secondly, the physical components of material could impact the conveying process from the rock crusher machine. If the raw material consists of thin silt, this sort of component will turn out to be sticky throughout the conveying process, thus producing the procedure considerably more complex. In this respect, we must cautiously screen the raw material before the entire procedure. Meanwhile, we'd better separate the thin silt to lessen the unfavorable impact it causes and make sure the proper functioning from the machine.
Thirdly, to some extent, the degree of fineness of material has an effect on the ability of sand making, generally speaking, the greater the requirement of fineness, the lower the performance of machine. So cautious program should really be made based on distinctive requirement, but in most instances, we can set the degree of fineness at medium.
Fourthly, the degree of viscosity of material might shorten the longevity of a machine. That is definitely to say, the material with greater degree of viscosity will readily get stick for the wall of the stone crusher, if not be removed in time, the machine may perhaps not have the ability to function properly. Since of this, we really should pick out material with lower degree of viscosity.
Lastly, the humidity degree of material may perhaps trigger clogging during the transportation process. When the material has a higher degree of moisture content material, clogging will happen in higher frequency. To solve this sort of challenge, we have to keep a tight manage of the humidity degree of material. If the material is wet, we are able to dry it by indicates of sun exposure or air drying.
With an international advanced level, roller crusher has already met the demand of quite a few difficult jobs, essentially it has grow to be indispensable for the improvement of heavy industry, but to make the most beneficial of it, we can't neglect the elements mentioned above.